1126 - High Tack Acrylic Transfer

Avery Dennison

E-Mail this datasheet
Request a quote

ADHESIVE TAPE FEATURES

Std Roll Length: 180.00 yards
High tack acrylic adhesive
Heavy adhesive mass
Densified kraft release liner for superior die cutting properties
Static Shear: 5.5 lbs. at 72° upon a 1" squared area>400 minutes to failure

ADHESIVE TAPE ADVANTAGES

Excellent initial tack and adhesion
Adheres to a wide variety of substrates
Excellent foam bonding characteristics

ADHESIVE TAPE APPLICATIONS

Lamination to polyether and polyester urethane foams
Textured substrates
ABS plastic
Aluminum-anodized
Cloth
EPDM
Fiberglass-molded
Film-polyethylene (treated)
Film-polypropylene (treated)
Foam-ethafoam
Foam-polyester urethane
Foam-polyether urethane
Foam-polyethylene
Foam polystyrene
Ceramic
Metal
Neoprene
Polycarbonate (lexan®)
Rubber-extruded
Stainless

ADHESIVE TAPE MARKETS SERVED

Foam
Automotive
Industrial

ADHESIVE TAPE COLORS

GENERAL INFORMATION

FT 1126 is a 4.9 mil, high tack, acrylic transfer. It is primarily used for applications requiring lamination to polyether and polyester urethane foams. The heavy mass of adhesive provides excellent inital tack and adhesion and should be considered for application involving a textured substrate. Specification #56091 (Also available with a 12 Point Natural Board Liner. Spec. # 57415)

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	None
Adhesive (unwind)	Acrylic	4.90
Liner Type (outer)	Paper (4.5 mils, 80# super tuff)
Thickness (total)		4.90

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	134.00 oz/in	134.00 oz/in
Adhesion Loop Tack	152.00	152.00
Adhesive Activation	Pressure
Testing Info: PSTC-33, ASTM D-1000, TAPPI T-411-M-44, FASSON TM-2, PSTC-3, ASTM D-3330, STD-10, PSTC-7, Federal Test Method 147B, STD-9

SECONDARY PHYSICAL PROPERTIES

Solvent Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	200°F
Maximum Short-Term Temperature	250°F

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.