1123 - High Tack Acrylic Adhesive Transfer

Avery Dennison

E-Mail this datasheet

FEATURES

Std Roll Length: 180.00 yards
High tack acrylic adhesive
Densified kraft release liner for superior die cutting properties
Static Shear: 5.5 lbs at 72° upon a 1" are>100 minutes to failure

ADVANTAGES

Excellent initial tack and adhesion
Adheres to a wide variety of substrates
Excellent foam binding characteristics

APPLICATIONS

FT 1123 is designed for applications requiring an acrylic adhesive for laminating to polyether and polyester urethane foams where high initial tack and adhesion are required
ABS plastic
Aluminum-anodized
Cloth
EPDM
Fiberglass-molded
Film polyetheylene (treated)
Film polypropylene (treated)
Foam polyester urethane
Foam polyether urethane
Foam polyethylene
Ceramic
Metal
Neoprane
Polycarbonate (lexan®)
Rubber-extruded
Stainless

MARKETS SERVED

Industrial

COLORS

GENERAL INFORMATION

FT 1123 is a 3.0 mil, high tack, acrylic adhesive transfer. It is primarily used for applications requiring an acrylic adhesive for laminating to polyether and polyester urethane foams where high initial tack and adhesion are required. Specification #56084

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	None
Adhesive (unwind)	Acrylic	3.00
Liner Type (outer)	Paper (4.5 mil, 80#super tuff)
Thickness (total)		3.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	112.00 oz/in	112.00 oz/in
Adhesion Loop Tack	70.00	70.00
Adhesive Activation	Pressure

SECONDARY PHYSICAL PROPERTIES

Solvent Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	200°F
Maximum Short-Term Temperature	225°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.