0816 - Single Coated Aluminum Foil

Avery Dennison

E-Mail this datasheet

FEATURES

Std Roll Length: 250.00 yards
Aggressive acrylic-based adhesive
Thick foil facestock
Static Shear: 5 lbs.upon a 1.0" squared area>230 minutes to failure
Tensile MDstrength is 2 US oz

ADVANTAGES

Provides good temperature and aging resistance
Provides strength and moisture barrier

APPLICATIONS

FT 0815 was developed for use in sound deadening applications, where the adhesive was secured to polyether-urethane foams
ABS plastic
Aluminum-anodized
Foam-polyester urethane
Ceramic
Metal
PVC-mildly plasticized
Stainless

MARKETS SERVED

Machine
Automotive
Appliance
Industrial
Foam

COLORS

Aluminum

GENERAL INFORMATION

FT 0816 is a 9.5 mil, single coated aluminum foil. It is primarily used in sound deadening applications, where the adhesive was secured to polyether-urethane foams. Specification #55866

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Aluminum	5.00
Adhesive (unwind)	Acrylic	4.50
Liner Type (outer)	Paper (3.4 mil, 60# densified kraft)
Thickness (total)		9.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	105.00 oz/in
Adhesion Loop Tack	145.00
Elongation Percent	5.00%
Testing Info: PSTC-33, ASTM D-1000, TAPPI T-411-M-44, FASSON TM-2, PSTC-3, ASTM D-3330, STD-10, PSTC-7, Federal Test Method 147B, STD-9

SECONDARY PHYSICAL PROPERTIES

Water Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	200°F
Maximum Short-Term Temperature	250°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.