1803 - Single Coated Foil Sealant Tape

Avery Dennison

E-Mail this datasheet

FEATURES

Std Roll Length: 50.00 yards
Dead Soft Aluminum Foil
Excellent Adhesion and Quick Stick
UL Classified-772S Registered
Static Shear: 2.2 lbs upon a .25" squared area>10,000 minutes to failure
UL® flame spread rating = 10
Surface burning characteristics to USLSTD smoke developed = 15

ADVANTAGES

Conformability to curved surfaces
Strong bond to a variety of substrates
Economically priced, general purpose

APPLICATIONS

Used for sealing joints and seams against moisture and vapor on foil jacketing insulation.

MARKETS SERVED

HVAC
Industrial

COLORS

Aluminum

GENERAL INFORMATION

Fasson 1803 is a 3.0 mil, single coated foil sealant tape. It is primarily used for sealing joints and seams against moisture and vapor on foil jacketing insulation. Specification

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Aluminum	1.50
Adhesive (unwind)	Rubber	1.50
Liner Type (outer)	Paper (40# densified kraft)
Thickness (total)		3.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	165.00 oz/in
Adhesion Loop Tack	144.00
Testing Info: Operating temperature shear adhesion failure: STD-243 on stainless steel

SECONDARY PHYSICAL PROPERTIES

Water Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	225°F
Maximum Short-Term Temperature	250°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.