0810 - SC Aluminum Foil Duct Board Tape

Avery Dennison

E-Mail this datasheet

FEATURES

Std Roll Length: 60.00 yards
Meets UL 181A-P1 standard
20 year Fasson Product Warranty
Meets SMACNA Performance Standard AFTS 101-73
UL ® flame spread rating = 10
surface burning characteristics to USLSTD smoke developed = 15
Probe Tack = 800 grams of force on stainless steel
Static shear is 1sq inch @ 10# takes 5,000+ minutes to fail

ADVANTAGES

Ultimate product reliability

APPLICATIONS

Used to tape and seal joints
Join seams on fibrous boards in the HVAC market

MARKETS SERVED

HVAC Industrial

COLORS

Aluminum

GENERAL INFORMATION

Fasson 0810 is a 4.7 mil, single coated, aluminum foil duct board tape. It is primarily used to tape and seal joints and seams on fibrous boards in the HVAC market. Specification #87412

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Aluminum	2.00
Adhesive (unwind)	Acrylic	2.70
Liner Type (outer)	Paper (50# Densified Kraft)
Thickness (total)		4.70

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	60.00 oz/in
Adhesion Loop Tack	132.00
Adhesive Activation	Pressure
Testing Info: PSTC-33, ASTM D-1000, TAPPI T-411-M-44, FASSON TM-2, PSTC-3, ASTM D-3330, STD-10, PSTC-7, Federal Test Method 147B, STD-9

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
Solvent Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	350°F
Maximum Short-Term Temperature	400°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.