0802 - Single Coated Foil Sealant Tape

Avery Dennison

E-Mail this datasheet

FEATURES

Std Roll Length: 50.00 yards
Dead Soft Aluminum foil
Excellent adhesion and Quick Stick
UL Rated
UL ® flame spread rating = 10
Surface burning characteristics to USLSTD smoke developed = 15
Probe Tack = 1685 grams of force on stainless steel
Static shear @ 72°F area is .25" square & Load is 2.2# = 10,000+minutes to failure

ADVANTAGES

Conformability to curved surfaces
Strong bond to a variety of substrates
Product reliability

APPLICATIONS

Specially designed for taping joints and seams against moisture and vapor on foil jacketing facings

MARKETS SERVED

HVAC Industrial

COLORS

Aluminum

GENERAL INFORMATION

Fasson 0802 is a 4.0 mil, Single Coated Foil Sealant Tape with a rubber based adhesive. It is specially designed for taping joints and seams against moisture and vapor on foil jacketing facings. Specification #50058

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Aluminum	2.00
Adhesive (unwind)	Rubber	2.00
Liner Type (outer)	Paper (40# densified kraft)
Thickness (total)		4.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	174.00 oz/in
Adhesive Activation	Water
Testing Info: PSTC-33, ASTM D-1000, TAPPI T-411-M-44, FASSON TM-2, PSTC-3, ASTM D-3330, STD-10, PSTC-7, Federal Test Method 147B, STD-9

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	175°F
Maximum Short-Term Temperature	200°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.