9500 - XHA Double Coated Acrylic Foam

Avery Dennison

E-Mail this datasheet

FEATURES

100% black construction through out
Static shear - 6000+ minutes to failure when initial 1"sq loaded with 500g
180° Peel Adhesion (oz force/inch width) on TPO is 70, BSF Ureglos is 55, PPG Carbamate is 50 (PSTC-3, ASTM D-3330, STD-10)

ADVANTAGES

Primerless on most TPO surfaces
Cold impact resistance
Excellent UV & gasoline resistance

APPLICATIONS

Specifically designed for attaching automotive exterior trim such as name plates, body side moldings, wheel flares, etc. to automotive clear coat paints

MARKETS SERVED

Automotive

COLORS

GENERAL INFORMATION

XHA™ 9500 is a series of double coated elastomeric foam. It delivers a quick initial bond & achieves superior adhesion to LSE materials. An exceptionally durable technology. XHA™ is engineereded for the most demanding industrial applications. Specifically designed for attaching automotive exterior trim such as name plates, body side moldings, wheel flares, etc. to automotive clear coat paints.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Elastomeric Foam
Liner Type (outer)	Film (white)
Thickness (total)		45.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	130.00 oz/in	130.00 oz/in
Adhesion Loop Tack	100.00	100.00
Adhesive Activation	Pressure

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
UV Resistant	Yes
Solvent Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	200°F
Maximum Short-Term Temperature	250°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.