816 - Single Coated Foil Tape

Avery Dennison

E-Mail this datasheet

ADHESIVE TAPE FEATURES

Static shear: Liner side= 500 minutes to failure when 5# are loaded to 1 square inch of product
Tensile strength MD is 2oz

ADHESIVE TAPE ADVANTAGES

ADHESIVE TAPE APPLICATIONS

ADHESIVE TAPE MARKETS SERVED

ADHESIVE TAPE COLORS

GENERAL INFORMATION

FT0816 is a 9.5 mil, foil used in sound dampening applications, where the adhesive was secured to polyether-urethane foams

PRODUCT CONSTRUCTION

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	105.00 oz/in
Adhesion Loop Tack	145.00
Adhesive Activation	Pressure
Elongation Percent	5.00%
Testing Info: PSTC-33M ASTM D-1000, TAPPI T-411-M-44, FASSON TM-2, PSTC-3, ASTM D-3330, STD-10, STD-7, PSTC-7, Federal Test Method 174B, STD-9

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	200°F
Maximum Short-Term Temperature	250°F

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.