815 - Single Coated Foil Tape

Avery Dennison

E-Mail this datasheet

FEATURES

ADVANTAGES

APPLICATIONS

MARKETS SERVED

COLORS

GENERAL INFORMATION

FT0815 is a 6.2 mil, single coated foil designed for use a a moisture barrier in the appliance industry.

PRODUCT CONSTRUCTION

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	81.00 oz/in
Adhesion Loop Tack	115.00
Adhesive Activation	Pressure
Testing Info: PSTC-33M ASTM D-1000, TAPPI T-411-M-44, FASSON TM-2, PSTC-3, ASTM D-3330, STD-10, STD-7, PSTC-7, Federal Test Method 174B, STD-9

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	200°F
Maximum Short-Term Temperature	250°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.