2833 - Single Coated Black PE Foam

Avery Dennison

E-Mail this datasheet

FEATURES

ADVANTAGES

Heat resistance
Environmental resistance
Gap filling & bonding rigid materials
Foam offers comformability while maintaining dimentional stabililty to die cut parts

APPLICATIONS

Used to cushion and seal glass screens for electronic displays
Gap filling

MARKETS SERVED

Automotive

COLORS

Black

GENERAL INFORMATION

FM2833 is a 32.2 mil, single coated black PE foam with a polyester film support used to cushion and seal glass screens for electronic displays. Applications where heat resistance, environmental resistance, gap filling and shatter resistance are important.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PE - Polyethylene	30.10
Adhesive (unwind)	Acrylic	2.10
Liner Type (outer)	Paper (53# Kraft)
Thickness (total)		32.20

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	32.00 oz/in
Adhesion Loop Tack	40.00
Adhesive Activation	Pressure
Testing Info: PSTC-33M ASTM D-1000, TAPPI T-411-M-44, FASSON TM-2, PSTC-3, ASTM D-3330, STD-10, STD-7, PSTC-7, Federal Test Method 174B, STD-9

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	200°F
Maximum Short-Term Temperature	250°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.