2454 - Double Coated Crosslinked Polyethylene Foam Tape

Avery Dennison

E-Mail this datasheet

FEATURES

ADVANTAGES

Very aggressive acrylic adhesive for strong permanent bond for any surface
Double coated construction
Good heat, humidity and solvent resistance
Good for filling and bonding rigid materials

APPLICATIONS

Specifically designed for bonding automotive mirrors to mirror housing

MARKETS SERVED

Automotive

COLORS

GENERAL INFORMATION

FM2454 is a 33.8 mil, cross linked polyethylene foam designed for bonding automotive mirrors to mirror housings. An aggressive acrylic double coated foam used where good adhesion, heat resistance, environmental resistance gap filling and shatter resistance are important.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PE - Polyethylene	30.00
Adhesive (unwind)	Acrylic	1.90
Adhesive (liner)	Acrylic	1.90
Liner Type (outer)	Paper (60# Kraft)
Thickness (total)		33.80

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	64.00 oz/in	66.00 oz/in
Adhesion Loop Tack	38.00	56.00
Adhesive Activation	Pressure

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	200°F
Maximum Short-Term Temperature	250°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.