FL1002 - Single Coated Foil Tape

Avery Dennison

E-Mail this datasheet

FEATURES

Dead soft 2 mil foil facestock
Quick stick rubber based adhesive
Static shear is 10,000 minutes to failure if 0.25" sq had a load of 2.2 #

ADVANTAGES

Conformable foil bonds to curved surfaces
Strong bond to a variety of substrates

APPLICATIONS

Suitable for die-cut shapes
Shielding
Moisture and vapor barrier sealing components
Lamination to insulation materials

MARKETS SERVED

Electronics

COLORS

GENERAL INFORMATION

FL1002 is a 4 mil, single coated foil tape suitable for die-cut shapes, shielding, moisture and vapor barrier sealing components or lamination to insulation materials.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Aluminum	2.00
Adhesive (unwind)	Rubber	2.00
Liner Type (outer)	Paper (40# kraft)
Thickness (total)		4.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	126.00 oz/in
Adhesion Loop Tack	59.00
Adhesive Activation	Pressure
Testing Info: PSTC-33M ASTM D-1000, TAPPI T-411-M-44, FASSON TM-2, PSTC-3, ASTM D-3330, STD-10, STD-7, PSTC-7, Federal Test Method 174B, STD-9

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	175°F
Maximum Short-Term Temperature	200°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.