FL1000 - Single Coated Foil Tape

Avery Dennison

E-Mail this datasheet

FEATURES

Static shear: 10,000 minutes to failure when 2.2# are loaded to .25 square inch of product

ADVANTAGES

High tensile strength
High tack

APPLICATIONS

Suitable for die-cut shapes
Shielding
Moisture and vapor barrier
Sealing components
Lamination to insulation materials

MARKETS SERVED

Electronics

COLORS

GENERAL INFORMATION

FL1000 is a 4.2 mil, single coated foil tape suitable for die-cut shapes, shielding, moisture and vapor barrier sealing components or lamination to insulation materials. It has a high tensile strength. High tack acrylic adhesive and a strong bleached 40# densified kraft liner.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Aluminum	2.00
Adhesive (unwind)	Acrylic	2.20
Liner Type (outer)	Paper ( 40# kraft)
Thickness (total)		4.20

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	72.00 oz/in
Adhesion Loop Tack	136.00
Adhesive Activation	Pressure

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	350°F
Maximum Short-Term Temperature	400°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.