1125HLP - Adhesive Transfer Tape

Avery Dennison

E-Mail this datasheet

FEATURES

High performance acrylic adhesive
Moisture resistant liner
Heavy adhesive mass
Static shear takes 10,000 minutes ot fail when a 1" square is loaded with 5.5#'s

ADVANTAGES

High temperature resistance
Excellent solvent and UV resistance
Humidity resistance
Conforms to irregular surfces

APPLICATIONS

Most long term name plate and decorative trim applications
Ideal for lamination to graphic overlay material

MARKETS SERVED

Plastics
Industrial
Trophy
Graphics
Sign

COLORS

GENERAL INFORMATION

FT 1122HLP was designed to meet adhesion and shear requirements for most long term name plate and decorative trim applications. Also idea for lamination to graphic overlay material.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	None
Adhesive (unwind)	Acrylic	5.00
Liner Type (outer)	PE (84#)
Thickness (total)		5.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	75.00 oz/in	75.00 oz/in
Adhesion Loop Tack	50.00	50.00
Adhesive Activation	Pressure
Testing Info: PSTC-33, ASTM D-1000, TAPPI T-411-M-44, FASSONTM-2,PSTC-3,ASTM D 3330, STD-10

SECONDARY PHYSICAL PROPERTIES

UV Resistant	Yes
Solvent Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	325°F
Maximum Short-Term Temperature	375°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.