1122HLP - Adhesive Transfer Tape

Avery Dennison

E-Mail this datasheet

FEATURES

High performance acrylic adhesive
Unsupported adhesive film
Moisture resistant liner
Heavy adhesive mass
Static shear: Liner side= 10,000 minutes to failure when 5.5# are loaded to 1 square inch of product

ADVANTAGES

High temperature resistance
Excellent solvent resistance
Humidity resistance
Conforms to irregular surfaces

APPLICATIONS

Nameplate and decorative trim applications
Lamination to graphic overlay material

MARKETS SERVED

Signage

COLORS

GENERAL INFORMATION

FT1122HLP was designed to meet adhesion and shear requirements for most long term nameplate and decorative trim applications. Also ideal for lamination to graphic overlay material.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	None
Adhesive (unwind)	Acrylic	2.00
Liner Type (outer)	PE (84#)
Thickness (total)		2.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	61.00 oz/in	61.00 oz/in
Adhesion Loop Tack	30.00	30.00
Adhesive Activation	Pressure
Testing Info: PSTC-33, ASTM D 1000, TAPPI T-411-M-44, FASSON TM-2; PSTC-3, ASTM D-3330, STD-10

SECONDARY PHYSICAL PROPERTIES

UV Resistant	Yes
Solvent Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	325°F
Maximum Short-Term Temperature	400°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.