MED2191H - Hydrocolloid Adhesive Transfer Tape

Avery Dennison

E-Mail this datasheet

FEATURES

Absorbent
Integrated; will not break down upon saturation
No animal derived compounds
Controlled cold flow
Can be gamma or E-beam sterilized
H2410 hydrocolloid adhesive has been screened for subchromic dermal irritation in the rabbit (ISO part 10) & for invitro cytotoxicity using the ISO elution method in the L-929 mouse fibrolast cell line
Reverse Tack: 4.45#/in
Static absorption : 6087 gr/m2/day
Dynamic absorption: 5972 gr/m2/day
Cold flow: 2%
Liner release: 4400 gr/m
Static shear: 122 minutes

ADVANTAGES

APPLICATIONS

MARKETS SERVED

COLORS

GENERAL INFORMATION

MED 2191H is a 18 mil hydrocolloid adhesive transfer tape designed for wound care, ostomy and fixation of medical devices.

PRODUCT CONSTRUCTION

PRIMARY PHYSICAL PROPERTIES

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	50°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.