MED5051 - Single Coated Clear Polyethylene Film

Avery Dennison

E-Mail this datasheet

FEATURES

ADVANTAGES

APPLICATIONS

MARKETS SERVED

COLORS

GENERAL INFORMATION

MED 5051 is a 3mil, clear polyethylene multipurpose film for surgical tape or component of medical devices.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PE - Polyethylene	3.00
Adhesive (unwind)	Acrylic
Liner Type (outer)	Paper (62# white polyethylene coated kraft)
Thickness (total)		Unknown

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	62.00 oz/in
Testing Info: Adhesion: PSTC-1; TLMI release: 90° at 300"/min; Mass weight: ASTM D-898; Caliper: ASTM D-1777-64(75); Basis weight: ASTM D-3776; Tensile: ASTM D-1682-64(75)

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.