MED5707 - Single Coated Polyester Fabric Medical Tape

Avery Dennison

E-Mail this datasheet

FEATURES

Moisture resistant liner
Breathable non-woven carrier
TLMI release: 350 grams/ 2" width
Mass weight: 52.3 grams/ sq meter
Basis weight: 2.4 oz/sq yd

ADVANTAGES

Non-sensitizing to patient's skin
Easy to die-cut and convert, reduces scrap
Air and moisture permeable for high user comfort

APPLICATIONS

Designed for applications to the skin for sustained periods where breathability and moisture vapor transmision are required

MARKETS SERVED

Medical

COLORS

White

GENERAL INFORMATION

MED 5707 is a 25 mil white spunlaced polyester non-woven fabric coated on one side with a non-sensitizing acrylic adhesive designed for applications to the skin.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PET - Polyester
Adhesive (unwind)	Acrylic
Liner Type (outer)	Paper ( 92# white polyethylene coated kraft)
Thickness (total)		25.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	52.80 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	12.00 lbs/in
Testing Info: Adhesion: PSTC-1; TLMI release: 90° at 300"/min; Mass weight: ASTM D-898; Caliper: ASTM D-1777-64(75); Basis weight: ASTM D-3776; Tensile: ASTM D-1682-64(75)

SECONDARY PHYSICAL PROPERTIES

Water Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	50°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.