8203 - Double Coated Crepe Tape

Avery Dennison

E-Mail this datasheet

FEATURES

Aggressive Rubber based adhesive
Saturated crepe carrier
Densified kraft release liner

ADVANTAGES

High adhesion and quick stick to a broad range of substrates
Thickness for conformability and good tensile strength for stability in processing and dispensing

APPLICATIONS

Suitable for bonding to a wide range of wood, metal and plastic substrates

MARKETS SERVED

COLORS

GENERAL INFORMATION

***DISCONTINUED BY AVERY DENNISON*** 8203 is a 4.2 mil crepe coated on the unwind side with 1.7 mils of rubber adhesive and on the liner side with 1.4 mils of same.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Crepe Paper	4.20
Adhesive (unwind)	Rubber	1.90
Adhesive (liner)	Rubber	1.40
Liner Type (outer)	Paper (60# Super Tough Liner)
Thickness (total)		7.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	140.00 oz/in	140.00 oz/in
Testing Info: Test methods: PSTC-33, ASTM-D-1000, TAPPI-T-411-M-44, FASSON TM-2; ASTM-D-3330,PSTC-3; PSTC-7,FEDERAL TEST METHOD 147B, FASSON TM-9

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	100°F
Maximum Short-Term Temperature	130°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.