1158 - Adhesive Transfer Tape

Avery Dennison

E-Mail this datasheet

FEATURES

Std Roll Length: 250.00 yards
Heavy adhesive mass
Allows for rotary die-cutting
Static shear is 70 minutes to failure when 1" square of material is loaded with 5.5#

ADVANTAGES

Excellent tack and adhesion
Excellent foam bonding

APPLICATIONS

Ideal for applications requiring an aggressive acrylic with excellent die-cutting capability

MARKETS SERVED

Industrial
Automotive
Foam

COLORS

GENERAL INFORMATION

1158 is a 5mil specially reinforced transfer adhesive for foam bonding and other low surface energy substrates. Ideal for applications requiring aggressive acrylic adhesive with excellent die-cutting and slitting properties.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	None
Adhesive (unwind)	Acrylic (reinforced)	5.00
Liner Type (outer)	Paper (4.5mil, 80# densified kraft
Thickness (total)		5.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	138.00 oz/in	138.00 oz/in
Adhesion Loop Tack	70.00	70.00
Adhesive Activation	Pressure
Testing Info: 180° peel adhesion: PSTC-3 & ASTM D-330; Loop Tack:TM-7A

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	125°F
Maximum Short-Term Temperature	175°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.