2333 - Double Coated Polyethylene Foam

Avery Dennison

E-Mail this datasheet

FEATURES

Std Roll Length: 72.00 yards
Closed cell PE foam
High tack acrylic adhesive
Densified kraft release liner
Static shear: 2.2 lbs at 72°F upon a 1" area > 1000 minutes to failure

ADVANTAGES

Strong bond to a variety of substrates, including low surface energy
Conformable to irregular surfaces
Strong release liner is suitable for die-cutting

APPLICATIONS

Light weight mounting to walls, irregular surfaces
Light weight mounting to low surface energy substrates
Mounting trophy medallions
Suitable for:
ABS
Anodized aluminum
Corrugated
Molded fiberglass
Treated polyethylene films
Treated polypropylene films
Glass
Ceramic
Painted metal
Powder coated metal
Polycarbonate (Lexan®)
Molded polypropylene
Stainless steel

MARKETS SERVED

Industrial
Medical (non-critical)
Specialty gifts & trophy
Appliance
Arts & Entertainment

COLORS

White

GENERAL INFORMATION

FM 2333 is a 1/32", white, cross lengthed polyehtylene foam coated two sides with a high tack acrylic adhesive for mounting applications. Specification # 56078.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PE - Polyethylene	31.00
Adhesive (unwind)	Acrylic	2.40
Adhesive (liner)	Acrylic	2.40
Liner Type (outer)	Paper (60#, white densified kraft)
Foam Cell Type	Closed
Thickness (total)		35.80

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	142.00 oz/in	135.00 oz/in
Adhesion Loop Tack	80.00	80.00
Adhesive Activation	Pressure
Testing Info: *Adhesions: Strenght of adhesion exceeds the strength of the foam-2 mil polyester support, 1 mil dwell, 12in/min;180° peel per ASTM-D-3330, PSTC-3;Loop tack TM-7A;Static shear PSTC-7

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	120°F
Maximum Short-Term Temperature	175°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.