2316 - Double Coated Polyethylene Foam

Avery Dennison

E-Mail this datasheet

FEATURES

Std Roll Length: 72.00 yards
Closed cell PE foam
High tack acrylic adhesive
Densified kraft release liner
Static shear: 5.5lbs at 72°F upon a 1" area > 1,000 minutes to failure

ADVANTAGES

Excellent adhesion to painted metal
Conforms to irregular surfaces
Resists mild plasticizers

APPLICATIONS

Fastening
Mounting
Suitable for:
ABS plastic
Anodized aluminum
Box board
Molded fiberglass
Treated polyethylene film
Treated polypropylene film
Glass/Ceramic
Painted metal
Powder coated metal
Polycarbonate (lexan®)
Molded polypropylene
Stainless steel

MARKETS SERVED

Industrial
Medical (non-critical)
Specialty gifts & trophy
Appliance
Arts & Entertainment

COLORS

White

GENERAL INFORMATION

FM 2316 is a white cross lengthed polyethylene foam coated two sides with a high tack acrylic adhesive for mounting applications. Specification # 56078.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PE - Polyethylene	62.50
Adhesive (unwind)	Acrylic	2.10
Adhesive (liner)	Acrylic	2.10
Liner Type (outer)	Paper (60# Super Tuff White)
Foam Cell Type	Closed
Thickness (total)		66.70

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	129.00 oz/in	123.00 oz/in
Adhesion Loop Tack	80.00	80.00
Adhesive Clean Removable	No	No
Adhesive Activation	Pressure
Testing Info: PSTC-33, ASTM D-1000, TAPPI T-411-M-44, FASSON TM-2, PSTC-3, ASTM D-3330, STD-10, PSTC-7, Federal Test Method 147B, STD-9

SECONDARY PHYSICAL PROPERTIES

Plasticizer Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	200°F
Maximum Short-Term Temperature	250°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.