3589 - Double Coated Crepe Paper

Adchem Corp.

E-Mail this datasheet
Request a quote

ADHESIVE TAPE FEATURES

Static shear is 6 days to failure when 1 sq inch is loaded with 250 grams

ADHESIVE TAPE ADVANTAGES

Ultra high tack
Moderate dead load
Economical
Good tensile strength

ADHESIVE TAPE APPLICATIONS

General purpose

ADHESIVE TAPE MARKETS SERVED

ADHESIVE TAPE COLORS

GENERAL INFORMATION

3589 is a 3.5 mil, crepe paper tape used in general purpose applications. Good tensile strength and ultra high tack makes this double coated crepe a good, economical choice.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Crepe Paper	3.50
Liner Type (outer)	Paper (60#)
Thickness (total)		6.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	80.00 oz/in	80.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	16.00 lbs/in
Elongation Percent	5.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.