468MP - 5.2 mil High Performance Acrylic Transfer

3M

E-Mail this datasheet

FEATURES

Std Roll Length: 60.00 yards
5.2 mil. 200MP acrylic adhesive
4.0 mil. paper liner
High cohesive strength
High performance solvent-free adhesive
Superior adhesive smoothness
Moisture stable liner
90° peel adhesion to ABS: 43oz./in.
Adhesion to polypropylene is not recommended

ADVANTAGES

Resistant to edge lifting and slippage
Exceptional environmental resistance
Enhanced bond strength
Improved clarity
Resists curling or wrinkling in high humidity
Bond builds to high ultimate bond strength
Resistant to high humidity, UV exposure and immersion in water

APPLICATIONS

Long term bonding of nameplates and decorative trim
Excellent adhesive for bonding metal and plastic nameplates
Lamination of wood veneers and plastics
Lamination to back printed polycarbonate or polyester graphic overlay materials
Assembly of membrane switches, including spacers for circuit separation graphic overlay for switch display and bonding the complete switch to the application surface

MARKETS SERVED

Automotive
Appliance
Electronics
Aerospace
Medical
Furniture

COLORS

GENERAL INFORMATION

A 5.2 mil. laminating tape featuring 200MP hi-performance acrylic adhesive on a polycoated paper liner used for bonding, laminating and assembly of membrane switches. 200MP adhesive is initially repositionable, then builds to a high ultimate bond strength. Bond will hold securely after exposure to numerous chemicals including gasoline, oil, Freon TF, sodium chloride solution, mild acids and alkalis.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	None
Adhesive (unwind)	Acrylic	5.20
Liner Type (outer)	Paper (4.2 mil, 58# tan polycoated kraft)
Thickness (total)		5.20

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 90° Peel	178.00 oz/in	178.00 oz/in
Adhesive Repositionable	Yes	Yes
Adhesive Activation	Pressure

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
UV Resistant	Yes
Chemical Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	-40°F
Maximum Long-Term Temperature	300°F
Maximum Short-Term Temperature	400°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.