2510 - Black Masking Tape

3M

E-Mail this datasheet

FEATURES

Std Roll Length: 60.15 yards
Special backside treatment provides easy to use controlled unwind
Designed for indoor use only, should not be subject to outdoor or UV exposure as it may become difficult to remove

ADVANTAGES

Good initial tack that sticks to a wide variety of surfaces
Resists lifting or curling
Good strength
Conformable
Withstands bake cycles up to 200°F for 60 mins
Dispenses evenly and is less likely to tear off roll so works well on paper dispensers
Eliminates use of organic solvents during manufacture to minimize energy & raw material consumption

APPLICATIONS

General painting where dark color is needed
Holding & bundling for a wide variety of materials
Sealing & wrapping applications

MARKETS SERVED

Industrial
Construction
Transportation

COLORS

Black

GENERAL INFORMATION

3M™ Black Masking Tape 2510 is a general purpose masking tape for holding, bundling, sealing and general paint masking where a dark colored tape is required.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Crepe Paper
Adhesive (unwind)	Rubber
Thickness (total)		5.60

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	35.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	20.00 lbs/in
Elongation Percent	9.00%

SECONDARY PHYSICAL PROPERTIES

Hand Tearable

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	0°F
Minimum Service Temperature	40°F
Maximum Short-Term Temperature	200°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.