412DL - Photopolymer Plate Mounting for Flexographic Print

3M

E-Mail this datasheet

FEATURES

Std Roll Length: 36.00 yards
Paper liner is 4mil
Poly liner is 4 mil
Density = 70#/ft3
Peel adhesion to composite sleeve = 30oz/in
Peel adhesion to Photopolymer = 40 oz/in
Peel adhesion to rubber = 50oz/in
Heat Resistance = 120°F

ADVANTAGES

Excellent adhesion to both rubber and photopolymer plates
High adhesion makes it a good choice for long runs
Helps reduce the tendency for plate edge lifting

APPLICATIONS

Plate mounting in printing applications

MARKETS SERVED

Printing Houses

COLORS

Gray

GENERAL INFORMATION

3M 412DL is a 2 mil, gray. double coated vinyl with a soft rubber adhesive designed for mounting photopolymer and rubber printing plates to flexographic printing cylinders or sleeve systems. The adhesive systems are specifically formulated for clean removability from both the plate and the print cylinder. The Flexomount&tm; solid vinyl carrier is designed for printing soldis and line work. This product is double linered with a paper liner and a poly liner.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Uncoated Cloth
Adhesive (unwind)	Rubber (soft)
Adhesive (liner)	Rubber (soft)
Liner Type (outer)	Poly
Liner Type (inner)	Paper
Thickness (total)		2.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	50.00 oz/in	50.00 oz/in
Adhesion Static Shear	35.27 oz/in	35.27 oz/in
Adhesive Activation	Pressure

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
Solvent Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.