35 - Vinyl Electrical Tape

3M

E-Mail this datasheet

FEATURES

An Underwriters' Laboratories Listed and Canadian Standards Association Certified "Insulating Tape"
Flammability UL510 is 1 sec & ASTM D1000 is 4sec
Accelerated Aging is 90%
Flagging is <0.1 inch
Telescoping is <0.1 inch after 24 hours @ 120°F

ADVANTAGES

Nine fade resistant colors
Abrasion and weather resistant tape
Excellent electrical insulating properties
Wraps smoothly
Conforms well
Holds over a wide range of temperatures
Resistant to moisture, alkalies, acids and corrosion
Inhibits corrosion of electrical conductors

APPLICATIONS

Designed for use in phase identification, color coding of motor leads and piping systems and for marking safety areas
For indoor and outdoor uses

MARKETS SERVED

COLORS

Blue
Brown
Gray
Green
Orange
Red
Violet
White
Yellow

GENERAL INFORMATION

3M 35 vinyl electrical color coding tape is an electrical grade polyvinyl chloride (PVC) tape with a pressure sensitive rubber adhesive available in nine fade resistant colors. It is designed for use in phase identification, color coding of motor leads and piping systems and for marking safety areas. This abrasion and weather resistant tape has excellent electrical insulating properties, wraps smoothly, conforms well and holds over a wide range of temperatures. 35 tape is resistant to moisture, alkalies, acids and corrosion. It is an Underwriters' Laboratories Listed and Canadian Standards Association Certified "Insulating Tape".

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PVC - Polyvinylchloride
Adhesive (unwind)	Rubber
Thickness (total)		7.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	20.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	17.00 lbs/in
Elongation Percent	225.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	105°F
Maximum Short-Term Temperature	176°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.