5498 - Silicone-Free PTFE Film Tape

3M

E-Mail this datasheet

FEATURES

ADVANTAGES

APPLICATIONS

Lining of composite bonding tool frames where there is concern of silicone contamination
Masking and bundling of composite parts prior to bonding operations where there is concern of silicone contamination

MARKETS SERVED

COLORS

GENERAL INFORMATION

3M5498 is an extruded PTFE film backing with a silicone-free rubber adhesive.

PRODUCT CONSTRUCTION

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	48.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Activation	Pressure
Tensile Strength	19.00 lbs/in
Elongation Percent	105.00%
Testing Info: Adhesion: D-3330, Tensile & Elongation: D-3759, Backing & Total tape thickness: D-3652

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	300°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.