3750 - Box Sealing Tape

3M

E-Mail this datasheet

FEATURES

Std Roll Length: 60.00 yards
Holding power to fiberboard=12,000 + minutes
Tensile strength (cross direction)=70lbs.
Core size=3"
Meets CID A-A-1684B

ADVANTAGES

Adheres instantly to most surfaces including cartons containing high levels of recycled content
The strongest conformable backing with the highest edge tear and split resistance
Complies with the enviromental considerations of ASTM D 1974-92
Superior performance ensures reliable closures
Roll to roll consistency increases productivity for unit costs

APPLICATIONS

Box sealing
Splicing
Recooperage
Demanding packaging applications

MARKETS SERVED

Paper products

COLORS

Clear
Tan

GENERAL INFORMATION

3750 is a 3.1mil, polypropylene film, primarily used for box sealing, splicing, recooperage and other demanding packaging applications. This product has the strongest conformable backing and the most consistent pressure sensitive hot melt adhesive system available. This time proven construction assures superior performance in a wide range of enviroments and applications.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	BOPP - Biaxially Oriented Polypropylene	2.00
Adhesive (unwind)	Rubber (resin hot melt)	1.10
Thickness (total)		3.10

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	55.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	35.00 lbs/in
Elongation Percent	160.00%
Testing Info: Adhesioin to steel=D-3330; Tensile strength, Elongation at break=D-3759; Tape thickness=D-3652; Holdinf power to fiberboard=D-3654

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.