2510VAMPING - Electrical Insulating Varnished Cambric

3M

E-Mail this datasheet

FEATURES

Std Roll Length: 36.00 yards
Breaking strength=38 pound per inch (of width)
Core material=paper
Core size=1in

ADVANTAGES

Excellent dielectric strength
Electrical properties are stable up to 220°F(105°C)
High puncture and cut-through resistance
Varnish cambric tapes are rated for Class A
Non-corrosive adhesive on 2520 tape, holds film in position until jacket is applied

APPLICATIONS

Insulating bus bars
Motor leads
Service drop connections

MARKETS SERVED

Industrial

COLORS

Yellow

GENERAL INFORMATION

2510 is a 7mil, varnished coated cotton cloth without an adhesive, primarily used for insulating bus bars, motor leads (for re-entry), and service drop connections. Scotch® Varnished Cambric Tapes are made from straight cut woven cotton cambric fabric. The fabric is oil primed and coated with a high grade yellow electrical insulating varnish. Varnished cambric tapes are flexible, electrically insulating and moisture resistant with a smooth finish. 2510 tape is yellow, non-adhesive coated and 7 mils thick. 2520 tape is yellow, with a pressure sensitive adhesive and 8 mils thick. They are designed to perform continuously in temperatures up to 220°F with excellent resistance to abrasion, puncture and cut-through. The adhesive on 2520 tape holds the tape in position after application.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Uncoated Cloth	7.00
Thickness (total)		7.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Elongation Percent	15.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.