2060 - Lacquer Masking Tape

3M

E-Mail this datasheet

FEATURES

Std Roll Length: 60.00 yards

ADVANTAGES

Instant adhesion
Sticks easily/helps reduce labor
Good holding power
Helps resist lifting or curling/helps reduce rework
Conformability
Easy handling/helps reduce time involved
Easy tear
Good handling/helps reduce waste
Seal/release treatment
Helps resist curl off
Controlled unwind
Paint anchorage
Helps resist paint flaking
Tape remains flexible
Helps resist slivering off the job

APPLICATIONS

Used to mask lacquer paints from surfaces and to mask lacquered surfaces from other types of paints and lacquers
Hold to and clean removal from stainless steel & most powder coated paints
Very good paint line

MARKETS SERVED

Industrial

COLORS

Green

GENERAL INFORMATION

3M masking tape 2060 is a 6mil tape, primarily used to mask lacquer paints from surfaces and to mask lacquered surfaces from other types of paints and lacquers. Removes with little or no adhesive transfer to most surfaces for up to three days after application, even when subjected to sunlight exposure. Tape should be removed at a 90° angle. It remains supple and resists curl off when coated with paints and lacquers. It resists paint and lacquer flaking when the tape is removed from the job. It should not be subjected to prolonged outdoor exposure. Tape may become very difficult to remove. It is manufactured in an ISO 9002 registered plant to meet worldwide quality standards.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Crepe Paper	6.00
Adhesive (unwind)	Rubber
Thickness (total)		6.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	34.00 oz/in
Adhesive Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	24.00 lbs/in
Elongation Percent	8.00%
Testing Info: Adhesion to steel=D-3330; Tensile strength, Elongation at break=D-3759; Tape thickness=D-3652

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
Solvent Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	200°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.