5962 - VHB™ Acrylic Foam Tape

3M

E-Mail this datasheet

FEATURES

Std Roll Length: 36.00 yards
Dark gray closed-cell acrylic foam carrier
VHB™ Acrylic Foam Tape
Static shear holds 1,000 grams/.5 sq. in.10,000 min. at 72°

ADVANTAGES

High solvent resistance
Moisture resistant
Highly conformable
UL 746 C

APPLICATIONS

Bonding low surface energy powder coated paints, metals, plastics & a variety of other paint systems

MARKETS SERVED

Industrial
Automotive
Aerospace
Marine
Truck and Trailer Body
Construction

COLORS

Gray

GENERAL INFORMATION

5962 is a 61mil VHB™ acrylic foam tape with double coated pressure sensitive adhesive. It is used for bonding a wide variety of substrates, including lower surface energy materials, such as powder coated paints and plastics. The foam is conformable to increase contact with surfaces.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Acrylic Foam	61.00
Adhesive (unwind)	Rubber (synthetic)
Adhesive (liner)	Synthetic
Liner Type (outer)	Red Polyethylene Film
Foam Cell Type	Closed
Thickness (total)		61.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	320.00 oz/in	320.00 oz/in
Adhesive Clean Removable	No
Adhesive Activation	Pressure
Tensile Strength	90.00 lbs/in

SECONDARY PHYSICAL PROPERTIES

Solvent Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	70°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	250°F
Maximum Short-Term Temperature	300°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.