5925 - VHB™ Acrylic Foam Tape

3M

E-Mail this datasheet

ADHESIVE TAPE FEATURES

Std Roll Length: 72.00 yards
Dark gray closed-cell acrylic foam carrier
VHB™ Acrylic Foam Tape
Static shear holds 1,000 grams/.5 sq. in. over 10,000 min. at 72°
Density = 40lb./

ADHESIVE TAPE ADVANTAGES

High solvent resistance
Moisture resistant
Highly conformable
UL 746 C

ADHESIVE TAPE APPLICATIONS

Bonding low surface energy powder coated paints, metals, plastics & a variety of other paint systems

ADHESIVE TAPE MARKETS SERVED

Industrial
Automotive
Aerospace
Marine
Truck and Trailer Body
Construction

ADHESIVE TAPE COLORS

Gray

GENERAL INFORMATION

5925 is a 25mil very high bond (VHB™ ) acrylic foam tape with double coated pressure sensitive adhesive. It is used for bonding a wide variety of substrates, including lower surface energy materials, such as powder coated paints and plastics. The foam is conformable to increase contact with surfaces.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Acrylic Foam
Adhesive (unwind)	Acrylic (modified)
Adhesive (liner)	Acrylic (modified)
Liner Type (outer)	Polyethylene (5 mil red film)
Foam Cell Type	Closed
Thickness (total)		25.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 90° Peel	272.00 oz/in	272.00 oz/in
Adhesion Dynamic Shear	1440 oz/in	1440 oz/in
Adhesive Clean Removable	No
Adhesive Repositionable	No
Adhesive Activation	Pressure
Tensile Strength	90.00 lbs/in
Testing Info: Tensile: ASTM D-897; Dynamic overlap shear ASTM D-1002; Dielectric/mil ASTM D149;

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
UV Resistant	Yes
Solvent Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	-40°F
Maximum Long-Term Temperature	200°F
Maximum Short-Term Temperature	300°F
Volume Resistivity	520 ohms/cm

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.