2364 - Performance Masking Tape

3M

E-Mail this datasheet

FEATURES

Std Roll Length: 60.00 yards
Should not be subjected to outdoor exposure or prolonged periods of sunlight
Natural rubber/synthetic blend adhesive
Class II (Silver) masking product

ADVANTAGES

Strong backing for general masking
Conformability allows for good curve masking
Solvent resistance prevents paint bleed-through
Paint flaking resistance reduces rework
Instant adhesion, allowing for easy stick and fast application
Good holding power resists lifting
Adhesive transfer resistance minimizes rework

APPLICATIONS

Paint masking
Good curve masking
Clean removal on surfaces for functional coatings or paints
Splicing
Heavy duty maintenance
SUITABLE FOR:
Stainless steel
Phosphate primer
Zinc primer
Most powder coated paints

MARKETS SERVED

Industrial
Construction
Automotive paint masking
Aerospace paint masking
Truck & trailer bodies paint masking
Recreational vehicles
Marine paint masking
Parts manufacturers
Printing manufacturers
Paper manufacturers
Electronics

COLORS

GENERAL INFORMATION

3M masking tape 2364 is a 6.5mil crepe paper tape for general masking applications in the industrial market, where good holding power and temperature performance is required. It has a natural/synthetic rubber adhesive blend. 2364 has been laboratory tested on painted steel panels and found to remove cleanly at bake temperatures up to 300°F for thirty minutes. The actual temperature and time performance may be higher or lower for a given application. Clean removal can vary depending on surface type, processing conditions, type of paint involved, as well as the temperature of the surface at removal. It has reliable masking and clean removal on surfaces for functional coatings or paints. 2364, a Class II (Silver) masking product is also used for splicing & heavy duty maintenance.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Crepe Paper
Adhesive (unwind)	Rubber (Natural/Synthetic)
Thickness (total)		6.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	36.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	30.00 lbs/in
Elongation Percent	10.00%
Testing Info: ASTM Test Method: Adhesion: D3330; Tensile, Elongation: D-3759; Thickness: D-3652; Elongation: D-3759

SECONDARY PHYSICAL PROPERTIES

Solvent Resistant	Yes
Hand Tearable	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	300°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.