2308 - Masking Tape

3M

E-Mail this datasheet

FEATURES

Std Roll Length: 60.00 yards

ADVANTAGES

Instant adhesion, allowing tape to stick easily
Good holding power resists lifting or curling
Very conformable, maintaining integrity when formed around a corner
Resists slivering, yet it is hand tearable

APPLICATIONS

Bundling
Sealing
Masking
Hold to and clean removal from stainless steel, EPDM rubber & most powder coated paints
Very good paint line

MARKETS SERVED

Industrial
Construction

COLORS

Brown

GENERAL INFORMATION

3M masking tape 2308 is a 5.5mil general purpose masking tape for holding, bundling, sealing, general paint masking and a vast number of other jobs where a pressure-sensitive tape is needed.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Crepe Paper	5.50
Adhesive (unwind)	Rubber
Thickness (total)		5.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	35.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	20.00 lbs/in
Elongation Percent	9.00%
Testing Info: Adhesion: D3330; Tensile, Elongation: D-3759; Thickness: D-3652

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
Solvent Resistant	Yes
Hand Tearable	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	250°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.