2214 - Paper Tape

3M

E-Mail this datasheet

FEATURES

Std Roll Length: 60.00 yards
Not suitable for outdoor or UV exposure

ADVANTAGES

Instant adhesion, allowing tape to stick easily
Good holding power resists lifting or curling
Very conformable, maintaining integrity when formed around a corner
Resists slivering, yet it is hand tearable

APPLICATIONS

Bundling
Sealing
Masking
Hold to and clean removal from stainless steel & most powder coated paints
Good Paint line

MARKETS SERVED

Industrial
Construction
Automotive
Aerospace
Truck & trailer bodies
Recreational vehicles
Marine
Parts manufacturers
Printing manufacturers
Paper manufacturers
Electronics

COLORS

Natural

GENERAL INFORMATION

3M masking tape 2214 is a 5.3mil general purpose paper tape for holding, bundling, sealing, non-critical masking and a vast number of other jobs where a pressure sensitive tape is needed.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Crepe Paper
Adhesive (unwind)	Rubber
Thickness (total)		5.30

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	24.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	20.00 lbs/in
Elongation Percent	10.00%
Testing Info: ASTM Testing Methods: Adhesion: D3330; Tensile, Elongation: D-3759; Thickness: D-3652

SECONDARY PHYSICAL PROPERTIES

Hand Tearable

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	150°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.