4737T - High Temp Translucent Blue Fine Line

3M

E-Mail this datasheet

FEATURES

Std Roll Length: 36.00 yards
Available in solid (opague) blue as 4737S

ADVANTAGES

Translucent backing allows the operators a full view of the substrate while positioning the tape
The conformable backing is designed for uniform stretching
Reduces paint seepage
Thinness of product gives outstanding color separation
Can be used successfully with solvent or water-based paint systems
Heat resistance ensures one piece removal
No adhesive residue
Rubber adhesive minimizes clean-up and rejects due to paint undercutting

APPLICATIONS

Ideal for OEM industry as a paint mask for metal and plastic surfaces

MARKETS SERVED

Automotive
Marine
Truck & trailer body

COLORS

Translucent

GENERAL INFORMATION

4737T is a 5.1 mil, translucent, high temperature fine line vinyl paint masking tape for fascia, rocker panels, two-tone and other multiple color applications where critical paint lines are required. It is a translucent blue whereas 4737S is a solid (opague) blue.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PVC - Polyvinylchloride	5.10
Adhesive (unwind)	Rubber
Thickness (total)		5.10

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	14.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	17.00 lbs/in
Elongation Percent	150.00%
Testing Info: Adhesion: ASTM D-3330; Tensile strength, Elongation: ASTM D-3759, Thickness: ASTM D-3652

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	325°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.