369 - Tartan™ Box Sealing Tape

3M

E-Mail this datasheet

ADHESIVE TAPE FEATURES

Std Roll Length: 109.00 yards
Hot melt rubber adhesive
Holding power to fiberboard: 1,000+ minutes
Tensile Strength (cross direction) = 38#/inch width

ADHESIVE TAPE ADVANTAGES

Low strength conformable backing
Edge tear and split resistance
Good holding power to fiber board
Adheres to a variety of surfaces

ADHESIVE TAPE APPLICATIONS

Carton sealing
Box closure

ADHESIVE TAPE MARKETS SERVED

Industrial
Packaging

ADHESIVE TAPE COLORS

Clear
Tan

GENERAL INFORMATION

369 is a 1.6 mil, biaxially oriented polypropylene film used for non-critical box sealing applications. This product has a conformable backing and a pressure sensitive hot melt adhesive system. This construction provides a good closure for lightweight boxes exposed to minimal distribution hazards.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	BOPP - Biaxially Oriented Polypropylene	1.00
Adhesive (unwind)	Rubber (hot melt)	0.60
Thickness (total)		1.60

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 90° Peel	30.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	19.00 lbs/in
Elongation Percent	160.00%
Testing Info: Adhesion per D-3330; Tensile per D-3759;Elongation per D-3759; Thickness per D-3652;Holding Power per D-3654

SECONDARY PHYSICAL PROPERTIES

Hand Tearable

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	120°F

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.