906 - Repulpable Flying Splice Tape

3M

E-Mail this datasheet

FEATURES

Std Roll Length: 36.00 yards
Available as 906W (white) and 906B (blue)
Totally repulpable
Tissue reinforced
Liner is a silicone coated, semi-bleached kraft paper
Bond Strength: Delaminates most papers

ADVANTAGES

High adhesion-even to treated papers
Strong splices
No need to remove splice from waste
Prevents broke contamination caused by non-repulpable splice material
Smoother surface contact improves splice strength
High tack
No "drying times," "correct mixes," "too soft," "too wet," etc. which can depend on operator performance or judgements

APPLICATIONS

Flying splice at Off Machine Coater
Splicing tape on Automatic Splicing Equipment
Core starting
Web printers, Bag makers

MARKETS SERVED

Paper products
Paper Mills
Printer Converter
Commercial Printing
Industrial

COLORS

Blue
White

GENERAL INFORMATION

906 is a 3 mil, light weight tissue. It is coated on both sides with a high tack, high shear strength repulpable adhesive. The tape is furnished on a repulpable easy-release paper liner.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	None
Adhesive (unwind)	Acrylic	3.00
Liner Type (outer)	Paper (4 mil, 65# semi-bleached kraft )
Thickness (total)		3.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Testing Info: TAPPI UM-213,Procedure A

SECONDARY PHYSICAL PROPERTIES

Water Resistant

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	400°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.