905 - Repulpable Flying Splice Tape

3M

E-Mail this datasheet

FEATURES

Std Roll Length: 60.00 yards
Repulpable adhesive helps increase waste value and decrease costly segregation procedures
Thin film adhesive functions readily in close tolerance equipment and helps reduce web breakage at nip roller
High initial adhesion creates immediate bond for flying splice to reduce setup time

ADVANTAGES

High tack
No drying time
No correct mixtures
Water solubility and alkali dispersability are excellent and eliminate rish of contaminating the paper mill broke with non-repulpable materials

APPLICATIONS

For graphic arts industry to meet a thin claiper requirement
Flying splice
General overlap splice in printing idustry
Adhesive for "forms" attachment
Attach paper webs to cores

MARKETS SERVED

Graphics Arts - Paper Mills
Business forms
Printer conversions

COLORS

Clear

GENERAL INFORMATION

905 is a 2 mil, acrylic adhesive transfer tape. Repulpable adhesive helps increase waste value and decrease costly segregation procedures. Thin film adhesive functions readily in close tolerance equipment and helps reduce web breakage at the nip roller. High initial adhesion creates immediate bond for flying splice to reduce setup time.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	None
Adhesive (unwind)	Acrylic	2.00
Liner Type (outer)	Paper (silicone coated brown kraft)
Thickness (total)		2.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesive Activation	Pressure

SECONDARY PHYSICAL PROPERTIES

Water Resistant

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.