9471 - Adhesive Transfer Tape with 300 Adhesive

3M

E-Mail this datasheet
Request a quote

ADHESIVE TAPE FEATURES

Std Roll Length: 60.00 yards
300 Hi Strength Acrylic adhesive
90° peel adhesion to polycarbonate (plastic) = 51 oz./in.
90° peel adhesion to polypropylene (plastic) = 36 oz./in.
Dielectric constant = 3.21 at 1KHz
Dissipation Factor = 0.040
Coefficient of thermal expasion = 20 x 10 to the negative 5th power m/ m/°C; 58 x 10 to the negative 5th power m/ m/°C
Available with a tan, 60# polycoated kraft with no print as 9471PC

ADHESIVE TAPE ADVANTAGES

Bond strength increases as a function of time and temperature
Humidity has minimal effect on adhesive performance
UV exposure has no effect on nameplates or decorative trim
Not effected by immersion in water
Bond strength increases after cycling four times through 4 hours at 158°F and -20°F and 16 hours at 73°F
Holds securely after exposure to numerous chemicals including oil, mild acids and alkalis
Resistant to heat up to 250°F

ADHESIVE TAPE APPLICATIONS

Long term bonding of graphic nameplates and overlays to surfaces such as metal and low surface energy plastics in the aerospace, medical and industrial equipment, automotive, appliance and electronic markets
Bonding metal nameplates and rating plates in the aerospace, medical and industrial equipment, automotive, appliance and electronic markets
To apply narrow strips of adhesive: Manual Dispensers - P52 and P56; Definite Length Dispensers - M96; Semiautomatic Dispensers - S625 w/ attachment, T646

ADHESIVE TAPE MARKETS SERVED

Nameplates
Industrial
Aerospace
Medical
Automotive
Appliance
Electronics

ADHESIVE TAPE COLORS

GENERAL INFORMATION

A 2.0 mil. transfer tape that offers excellent adhesion to a wide variety of surfaces, including low surface energy plastics. This pressure-sensitive acrylic adhesive is one of nine tapes that belongs to an adhesive family and is available in several thicknesses for a wide variety of surface bonding and provides a variety of liner configurations to help ensure excellent process flexibility. Available with a tan, 60# polycoated kraft with no print as 9471PC.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	None
Adhesive (unwind)	Acrylic	2.00
Liner Type (outer)	Paper (3.5 mil. 60# densified kraft, tan)
Thickness (total)		2.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 90° Peel	51.00 oz/in	51.00 oz/in
Adhesive Activation	Pressure
Adhesive Thermal Conductive	No
Testing Info: Peel Adhesions: ASTM D3330, modified, 12 in./min, 2.0 mil. aluminum to various surfaces; Dielectric Strength: ASTM D149-92; Dielectric Constant: ASTM D150-92; Coefficient of Thermal Expansion: ASTM D696

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
UV Resistant	Yes
Chemical Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	150°F
Maximum Short-Term Temperature	250°F
Dielectric Strength	340.00 volts

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.