FEATURES
- 90° peel adhesion to aluminum = 115 oz./in.
- 90° peel adhesion to ABS = 68 oz./in.
- 90° peel adhesion to acrylic = 67 oz./in.
- 90° peel adhesion to glass = 92 oz./in.
- 90° peel adhesion to polycarbonate = 65 oz./in.
- 90° peel adhesion to rigid PVC (unplasticized) = 69 oz./in.
- Static Shear at 70°F for 2000 grams = 10,000 minutes to failure
ADVANTAGES
APPLICATIONS
- To apply narrow strips of adhesive: Manual Dispensers - P52, P56
- Define Length Dispensers - M96
- Semiautomatic Dispensers - S625 w/ attachment, T646
- Long term bonding of graphic nameplates and overlays
- Bonding metal nameplates and rating plates
- Bonding graphic overlays for membrane switches and for bonding the complete switch to the equipment surface
- High speed processing of parts
- Lamination to industrial foams for rotary die-cutting of small gaskets
MARKETS SERVED
- Arts & Entertainment
- Aerospace
- Industrial
- Medical
- Appliance
- Electronics
COLORS
|
 |
GENERAL INFORMATION
| A 5.2 mil. tape with adhesive 200MP, perfect for graphic attachment and membrane switch applications due to it's excellent quality, consistency and durability. In addition, as a result of 3M's innovative, proprietary process, adhesive 200MP also offers the following excellent performance characteristics. Clarity - virtually free of vapor inclusions that are commonly found in adhesives produced by the traditional solvent coating technique. Excellent high temperature performance as well as excellent shear strength (minimizes edge lifting and slippage of parts). Excellent resistance to harsh environments; this adhesive can withstand splashes of organic solvents, weak acids and bases and salt water, cleaning solutions, germicidals, disinfectants, oils, etc. In additions, it performs well after exposure to humidity and hot/ cold cycles. Provides some initial repositionability when bonding to plastic parts (not metal). This allows graphic parts to be lifted and repositioned if initial alignment is incorrect. This tape is provided with a variety of liner configurations to help ensure excellent process flexibility. Adhesive 200MP is not recommended for low energy plastics. See 3M data sheet for Adhesion Retention after Immersion and Exposure chart and Electrical, Mechanical and Thermal Properties chart. |
|
| PRODUCT CONSTRUCTION |
| |
Type |
Mil Thickness |
|
 |
| Backing |
None |
|
| Adhesive (unwind) |
Acrylic |
|
| Liner Type (outer) |
HDPE (3.0 mil. clear film, no print) |
|
| Liner Type (inner) |
Paper (6.2 mil. tan 83# polycoated kraft,no print) |
|
| Thickness (total) |
|
5.20 |
|
|
| PRIMARY PHYSICAL PROPERTIES |
| |
Unwind Side |
|
Liner Side |
|
|
| Adhesion-to-Steel - 90° Peel |
118.00 oz/in |
|
118.00 oz/in |
| Adhesive Removable |
Yes |
|
Yes |
| Adhesive Clean Removable |
No |
|
No |
| Adhesive Repositionable |
No |
|
No |
| Adhesive Activation |
Pressure |
|
|
| Adhesive Thermal Conductive |
No |
|
|
| Tensile Strength |
55.00 lbs/in |
|
|
Testing Info: Peel Adhesions: ASTM D3330, modified; Static Shear: ASTM D3654, 1" x 1" sample area, aluminum foil to stainless steel; Dielectric Strength: ASTM D149-92; Tensile: ASTM D1002-72 |
|
|
| SECONDARY PHYSICAL
PROPERTIES |
| Solvent Resistant |
Yes |
| Chemical Resistant |
Yes |
|
|
| THERMAL / ELECTRICAL
PROPERTIES |
| Minimum Application Temperature |
40°F |
| Minimum Service Temperature |
-31°F |
| Maximum Long-Term Temperature |
300°F |
| Maximum Short-Term Temperature |
400°F |
| Dielectric Strength |
600.00 volts |
|
|
|