9373 - Flame Retardant Adhesive Transfer Tape

3M

E-Mail this datasheet

FEATURES

Std Roll Length: 60.00 yards
Areal density = 113 gm/Sq. M.
Thickness tolerance = +/ - 15%
90° peel adhesion to ABS = 77 oz./in.
90° peel adhesion to polycarbonate = 77 oz./in.
90° peel adhesion to polypropylene = 52 oz./in.
90° peel adhesion to polyethylene = 59 oz./in.
Shear adhesion to stainless steel for 1000 gm at room temp. = 10,000 min.; for 500 gm at 158°F = 10,000 min.

ADVANTAGES

These attributes and choice of three product thicknessess make the product ideally suited to applications in aerospace, maritime, electronic, automotive and bundling construction applications on both smooth and textured substrates

APPLICATIONS

Formulated for applications requiring flame retardency and high bond strength to a wide variety of substrates

MARKETS SERVED

Aerospace
Electronics
Construction
Industrial
Maritime

COLORS

White

GENERAL INFORMATION

A 3.0 mil. acrylic based adhesive transfer tape specially formulated to provide a permanent bond between substrates requiring regulatory compliance with various flame retardency standards such as Federal Aviation Regulation 25.853, UL 94 V-0/2, NFPA 1971 (2000 Ed.), FMVSS 302 and others. Three adhesive thicknessess are available: 2.0, 3.0 & 5.0 mil.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	None
Adhesive (unwind)	Acrylic
Liner Type (inner)	Paper (6.5 mil., 83#, lay flat, polycoated)
Thickness (total)		3.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	175.00 oz/in	175.00 oz/in
Adhesive Removable	Yes	Yes
Adhesive Clean Removable	No	No
Adhesive Repositionable	No	No
Adhesive Activation	Pressure
Adhesive Thermal Conductive	No
Testing Info: Peel Adhesions: ASTM D3330; Shear Adhesion: ASTM D3654, 1" x 1" overlap

SECONDARY PHYSICAL PROPERTIES

UV Resistant	Yes
Solvent Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	180°F
Maximum Short-Term Temperature	250°F
Flame Resistant	Yes

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.