9022 - Heavy-Duty Repulpable Double-Coated Tape

3M

E-Mail this datasheet

FEATURES

Std Roll Length: 60.00 yards
Repulpability - Tape = completely; Liner = completely
Bond strength has excellent hold to boxboard
Backing strength is higher than many other typical double coated repulpable tapes. This aids in dispensing and handling of long strips for core starting application, splices, roll closing, etc.
Instant adhesion offers excellent adhesion to many cores and papers

ADVANTAGES

APPLICATIONS

Core starting
Roll closing (holding last lap)
Flying pasters
Temporary splices
Fine paper (coated and uncoated), newsprint, kraft, linerboard, fluffing pulp and non-wovens
Fine (coated), specialty coating O.M.C.'s
Heavy, rough webs
Sheeters, bagmakers, etc.

MARKETS SERVED

Commerical Printing
Industrial
Paper

COLORS

GENERAL INFORMATION

A 5.5 mil. flatback paper coated on both sides with a colorless high tack, repulpable adhesive. Tape is furnished on an easy release paper liner. Offers optimum properties for many core-starting applications. Tensile strength facilitates dispensability and good handling properties, while the high initial adhesion provides quick, positive core starting. Performs well in a number of other applications in addition to many core starting applications. Packing in sealed plastic bags help protect the moisture content of the tape. Water solubility and alkali dispersability are excellent and eliminate danger of contaminating the paper mill broke with non-repulpable material. (Poor quality paper and plugged Fourdrinier screens can often be caused by many typical non-repulpable, rubber base tapes and adhesives.)

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Flatback Paper
Liner Type (outer)	Paper (repulpable kraft)
Thickness (total)		5.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesive Removable	Yes	Yes
Adhesive Clean Removable	Yes	Yes
Adhesive Repositionable	Yes	Yes
Adhesive Activation	Pressure
Adhesive Thermal Conductive	No
Testing Info: Repulpability: TAPPI UM-213

SECONDARY PHYSICAL PROPERTIES

Water Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.