2310 - Paint Masking Tape

3M

E-Mail this datasheet

FEATURES

Std Roll Length: 60.00 yards
Unique balance of adhesive and backing provides a high degree of resistance to tearing or slivering on removal
Adhesive has high shear strength on fiberboard and paper surfaces and good shear strength to boxboard
Rubber adhesive has instant adhesion, good holding power and superior adhesive transfer resistance
Controlled crepe paper backing offers smoothness, dead stretch and conformability
Backing saturant is solvent and moisture resistant, easy tear and sliver resistant
Special backside treatment has controlled unwind

ADVANTAGES

Excellent conformability and easy tear
Can be used at bake temperatures up to 325°F for one hour
Sticks easily/ allows fast application
Resists lifting or curling/ helps reduce rework
Clean removal/ reduces labor
Good surface contact/ secure holding
Minimal recovery/ reduces rework
Easy handling/ minimizes time involved
Resists bleed-through
Reduces waste

APPLICATIONS

MARKETS SERVED

Painting
Idustrial

COLORS

GENERAL INFORMATION

***3M discontinued this product & recommends 231, 2693 or 2380 as alternatives*** 3M masking tape 2310 is a 7.5 mil high temperature tape with high adhesion suitable for most paint applications. This strong, smooth masking tape embodies all the features that are desireable of a paint masking tape. Tape should not be subjected to outdoor exposure or prolonged periods of sunlight. Tape may become very difficult to remove.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Crepe Paper
Adhesive (unwind)	Rubber
Thickness (total)		7.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	36.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Adhesive Thermal Conductive	No
Tensile Strength	27.00 lbs/in
Elongation Percent	10.00%
Testing Info: Peel Adhesion: ASTM D3330; Tensile: ASTM D3759; Elongation: ASTM D3759; Thickness: ASTM D3652

SECONDARY PHYSICAL PROPERTIES

Solvent Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	325°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.