8916P - Appliance Filament Tape

3M

E-Mail this datasheet

FEATURES

Std Roll Length: 60.00 yards
Synthetic, pressure-sensitive, resinated adhesive
Reinforcement = glass yarn
Continuous high strength glass filament
Heavy film backing
Pressure-sensitive rubber adhesive

ADVANTAGES

High adhesion
Clean removal
Stain resistance to most finishes

APPLICATIONS

Hold appliance parts during manufacture and shipping

MARKETS SERVED

COLORS

Clear

GENERAL INFORMATION

A 6.0 mil. high performance transparent tape reinforced with continuous high strength glass filaments. The tape is designed to hold appliance parts together during manufacture and shipping. The heavy Scotchpar™ film backing provides proper stiffness and excellent abrasion, moisture, and scuff resistance. The pressure-sensitive adhesive is specifically formulated to provide high adhesion, clean removal, and stain resistance on most finishes.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PET - Polyester
Adhesive (unwind)	Rubber
Thickness (total)		6.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	90.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Adhesive Thermal Conductive	No
Tensile Strength	170.00 lbs/in
Elongation Percent	3.00%
Testing Info: Peel Adhesion: ASTM D3330; Tensile: ASTM D3759; Elongation: ASTM D3759; Thickness: ASTM D3652

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
Reinforcement	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.