FEATURES
- Std Roll Length: 9.00 yards
- A-30 acrylic adhesive
- 3.0 tan paper liner
- Cold flex at -20°F slowly bent around a 1/4in. diameter mandrel: no cracks
- Not resistant to MEK
ADVANTAGES
- Conformable
- Resistant to acetone, ammonia cleaner, engine oil, gasoline, JP-4 (jet fuel), mineral spirits and soapy water
- Bond builds with time and temperature
- Adheres to many substrates
APPLICATIONS
- Recessed lighting, door, window and cabinet seals
- Cushion, damp sound
- Absorb vibration in electronics, such as printers, keyboards, computers, aircraft lights and automotive dashboards
MARKETS SERVED
COLORS
|
 |
GENERAL INFORMATION
| A 375.0 mil. urethane tape, series 4310, featuring a A-30 acrylic adhesive on a thick silicone treated liner used for lighting, door, window and cabinet sealing applications. 4317 is a grey, conformable low-density, open-cell foam tape with a pressure-sensitive acrylic adhesive coated on one side. The adhesive is protected by a thick silicone liner. 4317 tape belongs to the 4310 urethane tape series which is a very soft, conformable, low-density foam helping seal out air, dust and light when compressed 50%. Extra care should be taken when handling these delicate rolls of tape to avoid damaging the tape. 4317 adheres to a variety of substrates, including latex painted wood, lacquered wood, enameled steel, glass, aluminum, stainless steel, acrylic, ABS and PVC (non-plasticized). The tape adhesion is typically satisfactory within 20 minutes and continues to build with additional time. The solvent/ fuel resistance test consists of visual observation of tape bonded to steel panels and immersed totally in solvent/ fuel for 24 hours. |
|
| PRODUCT CONSTRUCTION |
| |
Type |
Mil Thickness |
|
 |
| Backing |
PU - Polyurethane |
|
| Adhesive (unwind) |
Acrylic |
|
| Liner Type (outer) |
Paper (3.0 mil., silicone treated) |
|
| Foam Cell Type |
Open |
|
| Thickness (total) |
|
375.00 |
|
|
| PRIMARY PHYSICAL PROPERTIES |
| |
Unwind Side |
|
Liner Side |
|
|
| Adhesive Activation |
Pressure |
|
|
| Tensile Strength |
25.00 lbs/in |
|
|
| Elongation Percent |
125.00% |
|
|
Testing Info: Density: ASTM D3574; Hardness: ASTM D2240; Compression Deflection: ASTM D3574; Compress Set: ASTM D1667; Tensile: ASTM D3574; Elongation: ASTM D3574; Dielectric Strength: ASTM D149; Water Absorbtion: ASTM D1056 |
|
|
| SECONDARY PHYSICAL
PROPERTIES |
| Chemical Resistant |
No |
| Density |
Low |
| Compression Percent |
5% |
| Hardness ShoreOO |
6 |
|
|
| THERMAL / ELECTRICAL
PROPERTIES |
| Minimum Application Temperature |
50°F |
| Minimum Service Temperature |
0°F |
| Maximum Long-Term Temperature |
150°F |
| Maximum Short-Term Temperature |
250°F |
| Dielectric Strength |
40.00 volts |
|
|
|