9172MP - Double Linered Laminating Adhesive

3M

E-Mail this datasheet

FEATURES

#200MP hi-performance acrylic adhesive
4.0 mil. paper liner and 3.0 mil. polyethylene liner
Clear, film liner enables inspection of backlit graphics
90° peel adhesion to polycarbonate: 48oz./in.

ADVANTAGES

Accommodates application to smoother surfaces
Liner strength resists breakage and provides one-piece removal
High cohesive strength resists edge lifting and slippage
High humidity has minimal effect on bond strength
Resistant to UV exposure and immersion in water
Resistant to heat up to 400°F

APPLICATIONS

Lamination to backlit polycarbonate or polyester graphic overlay materials used in the automotive and electronics industries
Bonding metal and plastic nameplates with many die cut openings

MARKETS SERVED

Graphic Overlays
Arts & Entertainment
Automotive
Electronics
Industrial
Nameplates

COLORS

GENERAL INFORMATION

A 2.0 mil. laminating tape consisting of #200MP acrylic adhesive with a 4.0 mil. paper liner and a 3.0 mil. polyethylene liner primarily used for laminating plastics and bonding nameplates. This hi-performance adhesive provides exceptional environmental resistance and enhanced bond strength. Superior smoothness of #200MP adhesive provides improved clarity and lamination to thin plastic facestocks. 9172MP will hold securely after exposure to numerous chemicals including gasoline, oil, Freon™ TF, sodium chloride solution, mild acids and alkalis.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	None
Adhesive (unwind)	Acrylic	2.00
Liner Type (outer)	Paper (4.0 mil. 58# tan polycoated kraft)
Liner Type (inner)	Polyethylene (3.0 mil. high-density)
Thickness (total)		2.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 90° Peel	111.00 oz/in	111.00 oz/in
Adhesive Activation	Pressure
Testing Info: Peel Adhesion: ASTM D3330, 72 hour dwell, modified, 12 in./min., 2.0 mil. aluminum to various surfaces

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
UV Resistant	Yes
Chemical Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	300°F
Maximum Short-Term Temperature	400°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.