504 - High Temperature Adhesive Transfer Tape

3M

E-Mail this datasheet

FEATURES

Static shear on stainless steel at room temperature = 2000 gms. for 10,000 min.
Static shear on stainless steel at 158°F = 2000 gms. for 10,000 min.
Static shear on stainless steel at 200°F = 2000 gms. for 10,000 min.
Immersion in water has no effect on bond strength
When properly applied, nameplates and decorative trim parts ar not affected by outdoor exposure, and will hold securely after exposure to numerous chemicals including gasoline, oil, Freon™TF, sodium chloride solution, mild acids and alkalis
Outstanding temperature and chemical resistance
Low outgassing and low leachable chloride, important considerations for electronic and aerospace industries

ADVANTAGES

Exceptional shear value at elevated tmeperatures
Offer low "outgassing" properties associated with aerospace, automotive and electronic industries
Different liners for a variety of die-cutting applications
High humidity has a minimal effect on adhesive performance
Excellent bond to metal and high surface energy plastics

APPLICATIONS

Bond strength improves with firm application pressure and moderate heat (for metal surfaces only)

MARKETS SERVED

Aerospace
Automotive
Electronics

COLORS

GENERAL INFORMATION

504FL is a 4.0 mil. transfer tape that uses the 100 adhesive designed for temperature exposure to 450°F (232°C) for short periods of time and/ or solvent resistant. Bond strength increases as a function of time and temperature. 504FL will have lower intial tack than the other 3M 100 adhesive transfer tapes to some substrates.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	None
Adhesive (unwind)	Acrylic	4.00
Liner Type (outer)	Polyester (2.0 mil. with plastic core)
Thickness (total)		4.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 90° Peel	264.00 oz/in	264.00 oz/in
Adhesive Removable	Yes	Yes
Adhesive Clean Removable	No	No
Adhesive Repositionable	No	No
Adhesive Activation	Pressure
Adhesive Thermal Conductive	No
Testing Info: Peel Adhesion: ASTM D3330 20 aluminum, 12"/min.; Surface Energy: ASTM D3330; Dielectric Strength: ASTM D149-92

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
UV Resistant	Yes
Solvent Resistant	Yes
Chemical Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	-40°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	300°F
Maximum Short-Term Temperature	450°F
Dielectric Strength	1100.00 volts

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.