5702 - Safety Stripe Tape

3M

E-Mail this datasheet

FEATURES

Std Roll Length: 36.00 yards
4.2 mil. polyvinylchloride tranparent backing
1.2 mil. rubber adhesive
Black and yellow striped backing
Clear vinyl over colored stripes protects stripes from abrasion

ADVANTAGES

Promotes awareness of hazardous areas
Longer life than many surface printed products
Long expected life before re-taping
Resists snagging often associated with thicker products

APPLICATIONS

Excellent for many lane and safety marking applications
Identifies hazardous areas

MARKETS SERVED

Industrial

COLORS

GENERAL INFORMATION

A 5.4 mil. tape consisting of vinyl backing and rubber adhesive used for safety markings such as identifing traffic areas and physical hazards. 5702 resists most common solvents, but care must be taken to avoid ketones, ester and chlorinated hydrocarbons, which may cause the backing to swell or degrade in the intended product application. Avoid using this tape on highly plastizied materials which may result in adhesive softening and subsequent adhesion failure of tape.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PVC - Polyvinylchloride	4.20
Adhesive (unwind)	Rubber	1.20
Thickness (total)		5.40

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	19.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	15.00 lbs/in
Elongation Percent	170.00%
Testing Info: Peel Adhesion: ASTM D3330; Tensile: ASTM D3759; Elongation: ASTM D3759; Thicknesses: ASTM D3652

SECONDARY PHYSICAL PROPERTIES

Solvent Resistant	Yes
Chemical Resistant	No

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	60°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	170°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.